top of page

What Are E-Fuels? How Hydrogen Becomes Synthetic Fuel

8 hours ago
5 min read

Last updated November 19, 2026 · By Alex, ReneEnergy

What are e-fuels? E-fuels are synthetic fuels such as e-methanol, e-kerosene and e-methane made by combining hydrogen from electrolysis with captured carbon dioxide. They can run in today's engines, but a 2021 study in Nature Climate Change found they need two to fourteen times more electricity than direct electrification, so they make most sense for planes and ships, not cars.

That is the short answer. Below we explain how the chemistry works, run our own numbers on how much hydrogen and power one tonne of e-methanol takes, and show where e-fuels are a good idea and where batteries win.

What are e-fuels, and which types exist?

E-fuels are fuels whose energy comes from electricity, stored in chemical form by first making hydrogen. The study by Ueckerdt and colleagues (Nature Climate Change, 2021) puts the overall efficiency of turning electricity into useful energy through e-fuels at roughly 10% to 35%. Most e-fuels contain carbon, so they need a CO2 source; e-ammonia is the exception because it contains only hydrogen and nitrogen.

E-fuel

Made from

Main intended use

E-methanol

Hydrogen + CO2

Ship engines, chemicals

E-kerosene (synthetic jet fuel)

Hydrogen + CO2 (via synthesis gas)

Aviation

E-methane (synthetic natural gas)

Hydrogen + CO2

Gas grids, industrial heat

E-diesel / e-gasoline

Hydrogen + CO2

Existing road vehicles

E-ammonia

Hydrogen + nitrogen from air

Fertilizer, shipping fuel

How are e-fuels made from hydrogen?

E-fuels are made in three steps: split water into hydrogen with renewable electricity, capture CO2, then react the two over a catalyst to build a fuel molecule. Step one uses the most power: the U.S. Department of Energy lists today's PEM electrolyzer systems at about 55 kWh of electricity per kilogram of hydrogen (2022 status), with a 2026 target of 51 kWh/kg (DOE technical targets, updated May 2026).

  1. Electrolysis: electricity splits water (H2O) into hydrogen and oxygen.

  2. Carbon capture: CO2 is taken from an industrial flue gas, a biogenic source such as a biogas plant, or directly from the air.

  3. Synthesis: hydrogen and CO2 react under heat and pressure. Methanol synthesis follows CO2 + 3 H2 → CH3OH + H2O; jet fuel and diesel usually go through the Fischer-Tropsch process.

For a beginner's view of how hydrogen is mostly made today (from natural gas, not electrolysis), see our guide to steam methane reforming.

How much hydrogen and electricity does one tonne of e-methanol need?

By our calculation, one tonne of e-methanol needs about 189 kg of hydrogen and 1.37 tonnes of CO2, and making that hydrogen takes about 10.4 MWh of electricity at DOE's 2022 electrolyzer figure of 55 kWh/kg. This is ReneEnergy's own worked example from the reaction chemistry above (illustrative; it ignores conversion losses, CO2 capture energy and plant power use, which all add to the total).

Electrolyzer efficiency (kWh/kg H2)

Hydrogen per tonne of methanol (kg)

CO2 per tonne of methanol (t)

Electrolysis electricity per tonne of methanol (MWh)

55 (DOE 2022 status)

189

1.37

10.4

51 (DOE 2026 target)

189

1.37

9.6

46 (DOE ultimate target)

189

1.37

8.7

How we got there: methanol's molar mass is about 32.04 g/mol and three hydrogen molecules weigh about 6.05 g/mol, so each kilogram of methanol needs 0.189 kg of hydrogen. CO2 (44.01 g/mol) works out to 1.37 kg per kilogram. Multiply the hydrogen by the electrolyzer's kWh per kilogram and you have the power bill's biggest line.

Are e-fuels efficient compared with batteries?

No. For passenger cars, the 2021 Nature Climate Change study found that an e-fuel car needs about five times more renewable electricity than a battery electric car, and heat pumps are six to fourteen times more efficient than heating with e-fuels (Ueckerdt et al., 2021). Energy is lost at every step: electrolysis, synthesis and then the engine, which wastes most of the fuel's energy as heat.

Illustrative case

Electricity an EV draws (kWh/year)

E-fuel car, same driving, at 5× (kWh/year)

One car, assumed 3,000 kWh/year as an EV

3,000

15,000

The 3,000 kWh is an assumption for illustration; the five-times ratio is from the study. The point holds for any mileage: the same wind or solar farm can power about five battery cars for every one e-fuel car.

How much do e-fuels cost?

E-fuels are still expensive. The same 2021 study estimated e-gasoline at roughly €3.20 per litre before taxes for 2020–25, with a carbon-cutting cost of €800–1,200 per tonne of CO2 avoided, falling to about €47–51 per MWh for e-gasoline by 2050 if electrolysis and renewables keep getting cheaper (Ueckerdt et al., 2021). Because hydrogen is the main ingredient, the cost of the hydrogen sets most of the price. H2Hub explains how that number is built in What Is LCOH? A Practical Hydrogen Cost Example.

Where do e-fuels make sense, and where don't they?

E-fuels make the most sense where batteries and direct hydrogen struggle: long-haul aviation and deep-sea shipping. In the European Union, the ReFuelEU Aviation regulation, Regulation (EU) 2023/2405, requires synthetic aviation fuels to reach 1.2% of fuel at EU airports from 2030 and 35% from 2050, inside an overall sustainable aviation fuel share of 2% from 2025 and 70% from 2050 (European Commission, checked November 19, 2026).

  • Good fit: jet fuel for long flights, methanol or ammonia for large ships, and chemical feedstocks that need carbon anyway.

  • Poor fit: passenger cars and home heating, where batteries and heat pumps do the same job with a fraction of the electricity.

  • Open question: enough clean power and a sustainable CO2 source. Using fossil CO2 only delays its release.

E-fuels sit alongside the other industrial uses of hydrogen, such as ammonia and refining, covered in What Is Hydrogen Used For?

FAQ

Are e-fuels carbon neutral?

Only if the electricity is renewable and the CO2 comes from the air or a biogenic source. Burning an e-fuel releases the CO2 that went into it, so the climate benefit depends entirely on where that CO2 and power came from.

Can I use e-fuels in my current car?

E-gasoline and e-diesel are designed as drop-in fuels for existing engines. The catch is cost and efficiency: the 2021 Nature Climate Change study estimated about €3.20 per litre before taxes and five times the electricity of an EV.

What is the difference between e-fuels and biofuels?

Biofuels get their carbon and energy from plants or waste. E-fuels get their energy from electricity via hydrogen, and their carbon from captured CO2, so they are not limited by farmland, but they are limited by clean power.

Is e-ammonia an e-fuel?

Yes, it is usually counted as one. It is made from electrolytic hydrogen and nitrogen from the air, contains no carbon, and is mainly studied as a shipping fuel and a fertilizer feedstock.

Screening a real hydrogen project?

If you are weighing hydrogen for an e-fuel, ammonia or industrial project, H2Hub lets you start a project without an account or card, and your first full project report is free per account. Start a free project screen in H2Hub.

Related reading

Sources

  1. Ueckerdt, F. et al. (2021). Potential and risks of hydrogen-based e-fuels in climate change mitigation. Nature Climate Change, doi:10.1038/s41558-021-01032-7.

  2. U.S. Department of Energy. Technical Targets for Proton Exchange Membrane Electrolysis (updated May 29, 2026).

  3. European Commission. ReFuelEU Aviation, Regulation (EU) 2023/2405 (checked November 19, 2026).

  4. ReneEnergy calculation from methanol reaction stoichiometry (CO2 + 3 H2 → CH3OH + H2O) and the DOE figures above.

Fact-checked November 19, 2026.

Comments


Technical films · About · H2Hub · Hydrogen industry directory · Blog · Shop · Feasibility template · Privacy policy · Affiliate disclosure · Contact

As an Amazon Associate, ReneEnergy earns from qualifying purchases.

bottom of page